Dewatering Pump, Sump Oil Water Filtration, VIPOR-SOWF
The VIPOR-SOWF (Sump Oil Water Filtration) is most commonly installed in secondary containment vaults with a collection sump. The VIPOR-SOWF polishes and captures sheen as it evacuates water.
The VIPOR-SOWF is most commonly installed in a secondary containment vault with a collection sump. Though it operates similar to other oil-detecting pumps on the market, only the VIPOR dewatering pump system prevents sheen from passing.
Application - Oil containment. Polishing and capturing sheen in the event of an oil discharge.
Description - Plug and play installation. Simply plumb units into existing drainage systems or into substation yard.
Compliance - The VIPOR system enables facilities to comply with EPA regulations using filtering technology that prevents and traps oil and oil sheen that is mixed into secondary containment units, underground vaults or sumps.
VIPOR SOWF In Use
Full Description
The VIPOR-SOWF (Sump Oil Water Filtration) polishes and captures sheen as it evacuates water, with complete shutoff capabilities in the event of an oil discharge. Under normal conditions, when water drains into the VIPOR-SOWF system, the 6-inch pre-filter (25 micron) captures small sediment.
Next, water enters the 6- x 24-inch HFF (Hydrocarbon Flow Filter) where hydrocarbons and most volatile organic compounds will be removed from the water to a non-detectable level while meeting federal SPCC mandates.
Should a major hydrocarbon release occur, the VIPOR – SOWF stops the flow through the filter. As the dewatering pump continues to operate, water rises in the standpipe and activates the float switch that sends a signal to alarm for system attention.
Diverse Environmental Solutions Pty Ltd 15-21 Bremen Drive Salisbury South, South Australia 5106 ACN: 653 757 807 ABN: 18 653 757 807
